HobbyWireless
TR905 COMBO SET RECEIVER +TRANSMITTER 900MHZ 500MW
Details:, This is a great set of 500mw 0.9 GHz (900 MHz), transmitter and receiver with a single audio and video output (receiver with dual output for audio and video is available as an upgrade)., Receiver Specs:, , Transmitter Specs:, , Channels:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
If you have a 2.4 GHz radio control system, and ...HobbyWireless
TR524 COMBO SET RECEIVER +TRANSMITTER 2.4GHZ 500MW - LAWMATE
Details:, , Note: The 2.4GHz video system can not be used with any 2.4Ghz radio transmitter, it migh cause severe interferences., Package Includes:, , Transmitter Specs:, , Receiver Specs:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a great set of 500mW 2.4 GHz transmitter ...HobbyWireless
FPV524 PLUG AND PLAY 2.4GHZ 500MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
Details:, This is a complete plug and play wireless system set, and within few seconds you have everything connected and working wirelessly., The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV-PRO905 KIT 500MW 900MHZ DOUBLE RECEPTION - BEST 900 MHZ SYSTEM - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., For patch antennas position: Place each antenna opposing each other (back to back) pointing 45° or less towards the sky and your video reception will be fully covered front, above and behind., The plug and play board main features:, , Package includes:, - 1x Plug and Play transmitter 500mW 900MHzwith built-in microphone with, Specifications:, , Notes:, - The transmitter will have only the channel 1 (910 MHz) available to USA users to comply with FCC rules., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Besides this kit with can also be used with your ...HobbyWireless
TX-V1012 1000MW 1.2GHZ PLUG AND PLAY TRANSMITTER - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 40g (transmitter only) |
Details:, This is a plug and play transmitter only, part of our FPV1012 plug and play system., The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV512 PLUG AND PLAY 1.2GHZ 500MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| - Transmitter Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
Details:, , The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, - Transmitter 1.2Ghz 500mW, :, CH1-1080 CH2-1120 CH3-1160 CH4-1200 CH5-1010 CH6-1040, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
(We can't ship this item to US address, because the ...HobbyWireless
FPV-PRO1012 KIT 1000MW 1.2 GHZ DOUBLE RECEPTION - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 1.2 GHz 1000mW with built-in microphone with, Specifications:, Notes:, - The transmitter will have only the channel 8 (1280 MHz) available to USA users. Transmitters shipped to customers out of USA will have all channels available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Besides this kit with can also be used with your ...HobbyWireless
FPV1024 PLUG AND PLAY 2.4GHZ 1000MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, This is a complete plug and play wireless system set, and within few seconds you have everything connected and working wirelessly., The plug and play board has lots of important features built-in such as:, , Note:, We do not recommend the use of 2.4 GHz video system, with any 2.4Ghz radio controlled vehicles, Package includes:, , Specifications:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This system uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV-PRO1024 KIT 1000MW 2.4GHZ + DIVERSITY RECEIVER DOUBLE RECEPTION - LAWMATE - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, , This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 2.4 GHz 1000mW with built-in microphone (USA customers only channel 1 is available. It does not affect the performance of the transmitter), Specifications:, Note:, If you are not going to run your RC model, do not turn this transmitter on and leave it on for several minutes, it can overheat damaging the unit! It is 1000mW transmitter in a tiny metal box!!!, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
If you're looking for a rock solid FPV system with ...HobbyWireless
HITEC HS-65HB MICRO B/B SERVO
| * Speed | .14 sec/60 degrees @ 4.8V - .11 Sec/60 Degrees @ 6.0V |
| * Torque | 24.99 oz-in @ 4.8V - 30.55 oz-in @ 6.0V |
| * Weight | 0.39 oz (11.1g) |
| * Length | .92" (23.6mm) |
| * Width | 0.45" (11.6mm) |
| * Height | 0.94" (24mm) |
Details:, , Item Description:, ,
This is the HS-65HB Karbonite Micro Servo from Hitec. It ...HobbyWireless
BLACK STORK II OSD GPS NAVIGATION SYSTEM
| Features | - OSD board |
| http | //www.avionicsrc.com/blackstork.php |
Details:, , The BlackStork OSD package includes:, - OSD unit - 1.5 version latest firmware, Troubleshooting your OSD:, If you are experiencing a problem with you OSD, here is a easy way to troubleshoot it.,
After the great success of the Black Stork I, now ...HobbyWireless
BAROMETRIC ALTITUDE AND TEMPERATURE SENSOR FOR DRAGONOSD V2
Details:, Micro barometric altitude and temperature sensor for the DragonOSD., Specifications:, 0.1hPA/ 0.1C resolution, Very important note from the developer:, , I2C is a very popular communication bus. It has two signal lines: clock (SCL) and data (SDA). In a normal I2C circuit, each of these lines is connected to each I2C component on the bus as well a pull-up resistor (usually somewhere between 4k and 10k). I2C doesn't to my knowlege stricly define what voltage that pull-up value is but each component has limits on what it can handle. For example, the BMP085 barometer maxes out at 3.6v., So there are a few possible fixes:, The one what we have been discussing in the last few posts: run ArduIMU on 3.3v throughout. You still get extra pull-ups but at least the pull-up is to a safe 3.3v. To do this, put 3.3v on 5V pin on the FTDI connector and on the 3.3V I2C bus connector., The other way to fix this is that an ArduIMU updated firmware could be developed that modifies these lines in twi.c to turn off the pull-ups:, , So ArduIMU users: before you add 3.3v sensors to your bus, check their tollerances and make this update if they can't handle 5V.,
Pin header is included as optional pass-through for other I2C ...HobbyWireless
AEROSIM RC - FPV SIMULATOR - NEW FEATURES!
Details:, , New released features:, , Note for MAC users:, The MAC version is not supported directly from us. However, many MAC users have reported that AeroSIM RC runs fine in a MAC in several configurations., exclusive features:, - Full FPV support with Camera Pan&Tilt from your Transmitter,,
The first FPV flight simulator allows you to practice to ...HobbyWireless
FATSHARK DOMINATOR HEAD TRACKER MODULE
| - Futaba | in general Futaba 7 series radios and above support the HT |
| Unsupported radios | - Hitec Aurora9 |
Details:, This Head tracker module is specially and exclusively designed for the FatShark Dominator video glasses only., Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,
Thanks to the modular feature of Dominator video glasses, this ...HobbyWireless
T512 TRANSMITTER 1.2 GHZ 500MW - LAWMATE
| Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
| Weight | 14g (transmitter only) |
| · Nominal output impedance | 50 ohms |
| · 75-ohm impedance | 1Vp-p |
| · 10k ohm impedance | 1Vp-p |
| · Sub carrier frequency | 6.5MHz |
| · Operation temperature | -10 to 40 degrees Celsius |
| · Storage temperature | -40 to 80 degrees Celsius |
| · Operating humidity | 20 to 80% |
| 6 channels | CH1-1080 CH2-1120 CH3-1160 CH4-1200 CH5-1010 CH6-1040 |
Details:, (The use of this item is illegal in USA territory, for this reason we can't ship it to any USA addresses)., Features:, , Specifications:, , Standard shipping package:, ,
This is a great transmitter in a 1.2 GHz band. ...